Shop by Rolls of Self Adhesive Weights & Strips
Self adhesive balancing weights, also known as stick on weights, are one of the most popular consumable items we sell at Tyre Bay Direct.
Self adhesive weights are used for the balancing of alloy wheels and are available in either a matt, polished or even black finish. With different sizes including the most common 5g and 10g sections, 5g only sections and 2.5g sections, we are sure to have the right self adhesive wheel balancing weights for you.
Self Adhesive Weights
100 Strips of Self Adhesive 5g & 10g Weights (Polished Finish)
£19.79 incl VAT£16.49 excl VAT
In Stock
Self Adhesive Weights
£11.87 incl VAT£9.89 excl VAT
In Stock
Bulk Buy + Save
Self Adhesive Weights
£10.55 incl VAT£8.79 excl VAT
In Stock
Bulk Buy + Save
Self Adhesive Weights
£10.94 incl VAT£9.12 excl VAT
In Stock
23% off bulk buy
Wheel Balance Weights
£17.15 incl VAT£14.29 excl VAT
In Stock
Bulk Buy + Save
Wheel Balance Weights
Zinc Coated Adhesive Weight Strips 5g and 10g Sections [Matte Finish]
£10.55 incl VAT£8.79 excl VAT
In Stock
Self Adhesive Weights
£10.55 incl VAT£8.79 excl VAT
In Stock
Bulk Buy + Save
Tyre Consumables
£10.55 incl VAT£8.79 excl VAT
In Stock
Not found the Self Adhesive Weights you need?
Give us a call now on 01527 883 580 and we'll be happy to talk about what your requirement is and how we can help solve it!
Adhesive Weight Application
If you've not been through the Application of Adhesive Weights, you might appreciate this quick insight into how they work.
- Preparation work - Firstly, rotate the tyre and determine the wheel imbalance in both planes. Ideally, the weight, rim and ambient temperature should be around 15 degrees centigrade as this enables the adhesive backing to perform at its best. Thoroughly clean the rims with an appropriate cleaning agent to avoid grease and silicone residues on the rim.
- Removing the protective backing - Having identified the weight position to the rim, peel off the protective backing without touching the adhesive.
- Assembling the weight - Now press the weight to the rim from the middle towards the outer edges. The pressure should be applied for at least 20 seconds. After assembly 80%-90% of the final adhesive force is achieved after approx 24hrs. Full adhesive force is achieved after 72 hrs of application.
